Royal Display Co.,Limited
Professional LCD Manufacturer Make LCD Simple
Add to Cart
| Size: | Tube Chip Color: |
|---|---|
| Display Function: | Pixels: |
| Surface Color: | Polarity: |
| Digits: | Color: |
OUR SERVICE ADVANTAGES
1. Small order would be accepted.
2. Mass production lead time would be guaranteed.
3. Each order will have 0.2%-0.5% spare.
4. Even customers do not have a cooperation with us, we also can provide technical services.
5. If mass production has any quality problem, customer can return it.
Custom display
7 segment LED Display Series-More Choices for Your Purchase
| Size | Digit | Digit Height | Polarity | Color | Face |
| 0.28" LED DISPLAY | one | 7.0mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 0.3" LED DISPLAY | one | 7.8mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 0.36" LED DISPLAY | one | 9.1mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 0.39" LED DISPLAY | one | 9.9mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 0.56" LED DISPLAY | one | 14.2mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 0.8" LED DISPLAY | one | 20.4mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 1.2" LED DISPLAY | one | 30.6mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 1.5" LED DISPLAY | one | 38.1mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 2.3" LED DISPLAY | one | 56.8mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 3.0" LED DISPLAY | one | 75.0mm | CC/CA | R,G,B,Y,W | Black/Grey |
| 4.0" LED DISPLAY | one | 101.6mm | CC/CA | R,G,B,Y,W | Black/Grey |
Segment LCDs, also called static displays or glass-only displays, are constructed of two pieces of ITO (Indium tin oxide) glass with a twisted nematic fluid sandwiched in between. A static display is a segment display with one pin for every one segment.
These displays are still one of the most popular technologies in use and the majority of them are custom. Many people think the process of designing a custom segment liquid crystal display is complicated and too complex to be understood except for a few experienced people. But after designing custom LCDs for over 14 years, it can be said that just about anyone can select the best options for their product.
In other words, you don’t have to be an engineer, or have a PHD from MIT to design a custom LCD for your application. So instead of offering a list of technical terms and equations, these are the different options available.
Although Segment displays are an older technology, it is still one of the most popular. After all, they cannot display all the colors of a TFT or OLED like what can be seen on a cell phone and tablet.
Why?
Below are key reasons why people keep designing these LCD displays into new products.
Focus LCDs offers a one-time NRE (Non-recurring engineering) or tooling fee. This includes all design, technical support, and samples. A PDF showing an overview of our tooling process can be found by clicking here: Custom LCD Flowchart
Low Power Consumption
Segment displays require less power than other display technology such as TFT, OLED, and UWVD. This makes these LCDs ideal for applications that are battery powered or solar powered. They require the lowest power to drive, an estimated 2uA per centimeter squared. Glass only displays (no backlight and no controller) require an estimated 10% of the power that is required for a LED backlight. In other words, a static display without a backlight will draw around 1mA; the same display with a LED backlight will demand from 10mA up to 25mA. Most displays can be driven at 3.3V or 5V since microprocessors can operate at both voltages. 3.3V is becoming more popular since two double ‘AA’ batteries can produce between 3.0V and 3.3V.